Please find here feature list and operating instructions for our timer as a download -> operating instruction digital rally timer:

The digital 3-fold timer is the ideal tool for the co-pilot at a classic car rally.

Large numbers on the display guarantee ideal readability even in hectic rally situations and in difficult lighting conditions.

The triple timer is also a stopwatch for up to three times or for two stop times and one time.

The housing has a plastic clip and a magnet on the back. Ideal for different mounting situations.

The timer sticks to metal dashboards, for example, thanks to the magnet.

Which functions are available?

• Count down / Count down
• Alarm signal at >0<
• Count up / Count up
• Time function / Time of day: switchable with 12 or 24 hour display
• Date

The technical data :

• Large LCD display with digit height 8mm / 6mm
• Display range: 99 hours 59 minutes 59 seconds.
• Lightweight plastic housing with retaining clip and magnet
• Dimensions: approx. 83 x 70 x 22 mm
• Weight: approx. 80 g.

User Manual VINTAGEDRIVER 3x Timer

First: Insert the batteries: Slide the small cover on the back of the device underneath the clip downwards. Insert two AAA batteries (not included) into the battery compartment.

Note the opposite insertion direction: the „flat“ end of the battery should be on the spring.

Switching the timer on/off:
Press the ON/OFF button for approx. 3 seconds to switch the device on or off. Countdown function: Press one of the buttons on the top of the device (TIMER 1, TIMER 2, TIMER 3) to select a counter.

Press the HR button to set the hours, MIN to set the minutes and SEC to set the seconds. If necessary, clear the setting with the CLEAR button. The maximum time setting is 99 hours, 59 minutes and 59 seconds. Press START/STOP to start and stop the countdown. When the timer reaches 0:00:00, an alarm is triggered and the timer counts up again. Press any button to stop the alarm.

If a timer time is set for all three counters, the countdown runs simultaneously for all counters when START/STOP is pressed. If a counter triggers an alarm, it can be switched off by pressing any button. The other counters continue to run in the meantime.

Count-up function

Press one of the buttons on the top of the device (TIMER 1, TIMER 2, TIMER 3) to select a counter. Press START/STOP to start and stop the timekeeping function. If necessary, clear the stopped time with the CLEAR button. Note: it is not possible to start all three count up operations simultaneously Adjustable alarm volume Slide the button on the backside to adjust the alarm volume to high or low

If the timer is not used for a longer period of time, it may be useful to remove the batteries and store them separately.

Good results with the tool .)